7P notes: Wacom Movink 13 (DTH-135)
I am currently evaluating this product. So these notes are IN PROGRESS.
Basics
User manual: https://101.wacom.com/UserHelp/en/TOC/DTH135TOC.html
Pen
Comes with a special version of the Wacom Pro Pen 3. More here Wacom Pro Pen 3.
This variant of the Wacom Pro Pen 3 is exactly the same as the normal pro pen in terms of pressure response, IAF, max pressure.
But there are a few differences.
First, the standard Wacom Pro Pen 3 comes with a metal rod you can use to change the weight and weight distribution of the pen. This variant does not have that rod.
Instead inside the pen, there is storage for 3 nibs.
Also this variant pen does not come with any grips or any button strips.
Pen compatibility
Pens listed as compatible by Wacom
Wacom Pro Pen 3 - I tested this. It works.
Wacom Pro Pen 2 - I tested this. It works.
Pens not specifically listed as compatible by Wacom
Wacom One GEN1 pen (CP-913) - I tested. It works.
Wacom One GEN2 pen (CP-923) - I tested. It works.
Samsung S pen (that comes with Galaxy Tab series) - I tested. It works.
Samsung S pen (that comes with Samsung S24 Ultra phone) - I tested. It works.
Core specs
Pen tech: EMR
Active Area diagonal: 13.3"
Pen pressure levels: 8192
Tilt: YES. 60 degrees
Resolution: 5080 LPI (200 LPMM)
Report rate: Wacom does not specify
Max hover height: Wacom does not specify
Display specs
Display panel type: OLED
Panel bit depth: 10bit
Display resolution: 1920x1080 (HD)
Aspect Ratio: 16x9
Display size : 13.3"
Refresh rate max: 60Hz
Surface: Anti-glare glass (presumably means etched glass)
They also say it has Anti-fingerprint coating
Response time: 0.2ms
Contrast ratio: 100000:1
Display color modes
In the OSD you can alter the color modes.
Native
AdobeRGB
DCI-P3
Rec.709
Rec.2020
Display P3
sRGB
EBU
Custom
Out of the box, the color mode is set to Native. I use it with the sRGB color mode.
Display OSD
The button on the right side of the tablet when tapped brings up the OSD.
You can use touch to work with the OSD. This works even if you have disabled touch for use with the tablet. That is a nice touch!
These 4 OSD options lead to sub menus: Input Source, Display settings, Tablet buttons, Other settings.
These 2 OSD buttons toggle on/off: Display saving, Touch on/off
Brightness
Wacom lists the max brightness at 350 nits.
Out of the box the brightness is set to 50%.
I use it at 50%.
100% is bright but clearly not as bright as my Surface Pro 8 at 100% (450 nits) or as bright as the Samsung Galaxy 8 Ultra at 100% (420 nits)
Heat
At 50% brightness and left running for a few hours the tablet felt cool to the touch.
OLED longevity
To early to say.
Pointer lag
Still obvious pointer lag, but notably less than many pen displays.
Still not close the the very minimal pointer lag of an Apple iPad with the Apple Pencil 2.
Parallax
Very good. Probably better than the Cintiq Pro tablets.
Not quite as good as an iPad.
Display color fringing
The display exhibits some subtle color fringing. I can notice this when your eyes are close to the display - maybe up 6" to 8" away - and I have to be looking for it.
If you draw a black disc on a white background, the fringing manifests as about a 1 pixel width change in color at the edge of the disk. From the top and the left the color is shifted slightly towards green. From the bottom and the right the color is shifted toward magenta.
This gives the appearance of slight "chromatic aberration" effect.
I suspect this is a result of the OLED panel and normal.
I notice the same thing int the OLED panel of my Smasung Galaxy Tab S8 Ultra. Though in the Samsung tablet the effect seems a bit less. Maybe that is due to the higher resolution of the display panel in my Samsung device.
Display sharpness
Pixels on the display are sharp and well-delineated.
Pen tilt
Typical. nothing out of the ordinary.
Pen tilt compensation - GOOD. Changing the tilt of the pen did not significantly change the location of the pointer.
Pen tracking accuracy
Typical. Very accurate across entire display. slight inaccuracy (maybe 2mm) at the very edges of the display.
Diagonal wobble
TO BE EVALUATED
Active Area
11.6in x 6.5in = 13.3in diagonal
294mm x 165mm = 337mm diagonal
Weight
It weights 420g. This an exceptionally low weight.
420g is less than these pen displays
Wacom One Gen (DTC-133) 1000g
Wacom One 12 (DTC- 121) 700g
Wacom one 13 touch (DTH-134) 900g
It weighs less than any of the these Intuos Pro pen tablets:
Intuos Pro Small (PTH-460) -> 450g
Intuos Pro Medium (PTH-660) -> 700g
Intuos Pro Large (PTH-860) -> 1300g
Thickness
Is very thin at 6.6mm.
It is thinner than the Wacom One pen displays which are 14.6mm
It is even thinner than some pen tablets.
the Intuos Pro tablets (PTH-x60) are between 8mm and 8.45mm thick.
The One by Wacom pen tablets (CTL-471, CTL-672) are 8.7mm think.
Touch support
Yes
Windows - Works well on Windows
Mac OS - did not test
Connectivity and Cabling
2 USB-C ports
One on left side
One on right side
Either port can be used to connect to the computer
Wireless support: NO (typical for pen displays)
Cable comes with tablet; YES a 1m USB-C cable comes with the box
Can be used with other USB-C cables. Not mentioned explicitly by wacom.
Buttons
There are two side buttons. One on top left side and one on top right side. There is some ability to configure the behaviors of the buttons.
Dead Pixels
none observed.
Blacks
Very deep blacks as expected due to OLED.
Ergonomics
VESA mounting - This tablet does NOT have VESA mounting holes.
Legs - This tablet does NOT have legs
Built in Stand - This tablet does not have a built in stand
Comes with stand - No must be purchased separately
Audio
No headphone jack
No built-in speakers
Fans and Fan noise
No fans. No fan noise.
Noise
Completely quiet. No noise at all.
Using it as a pen tablet
This means can we turn off the screen and use it like a pen tablet like an Intuos Pro.
There isn't DIRECT support for this feature unlike some pen tablets, but you can tell your OS to stop sending a signal to the tablet and it will behave like a pen tablet once the screen turns off.
Using it with a Chromebook
In my testing, the pen does not work when used with ChromeOS.
The tablet functioned only like a touch-enabled external display.
Using it with an Android device
I connected my Samsung Galaxy Tab S8 Ultra to a Microsoft Surface Thunberbolt dock. Then I connected the dock to the Movink 13 using a Thunderbolt 3 cable.
I was able to draw with pressure sensitivity and tilt.
I had no way to configure the actions of the pen buttons. And clicking on them did nothing that I observed.
Accessories
Wacom Foldable stand
Wacom Movink Tablet Sleeve
Wacom Converter for HDMI
Last updated
